Просмотр

What Is Powder Coating Equipment?

It's a sort of coating equipment that helps in applying powder. Powder coating equipment does not involve solvents rolling around in its processes. The coating is done electrostatically which is then passed under heat, allowing the powder to circulate and form a "skin". It could be a thermoset polymer or possibly a thermoplastic. Generally, it's employed to provide a hard finish which is harder compared to the conventional point that was formerly used. The principle function of applying this devices are for coating metals, such as bicycle parts, household appliances, aluminium extrusions and more.

Advantages

Few benefits of powder coating are mentioned below:

- Emission Of Chemical toxins Are Reduced By Coating The Metals 
- It Produces Much Thicker Coating As Compared To Traditional Liquid Coating 
- It could be Recycled, Facilitating 100% Reusability From the Substance 
- Produces Less Hazardous Waste In comparison with Traditional Using Liquid 
- Lesser Operating Cost Than Liquid Lines

Technique of Powder Coating

The Powder Coating Equipment operate in following basic processes:

- Part Preparation Or even the Pre-Treatment 
- The Powder Application 
- Curing

Processes And Equipment Of Part Preparation

Prior to powder coating process eliminating lubrication grease, metal oxides, mud, oil etc are necessary. There are several chemical along with mechanical types of removing these substances from the metal surface. The technique is determined by the performance requirement of the end product. In spray application process, chemical pre-treatments involve the application of chromates and phosphates. Phosphating and chromating in the substrate occur in multiple stage. Bonding with the powder for the metal involves cleaning in the pre-treatment process. Sand Blasting is definitely an yet another way of preparing the surface prior to coating. It really is employed to provide finishing, etching, surface texturing and preparation and degreasing for products made of wood, glass, or plastic. Different powder coating applications can require alternative methods of preparation including abrasive blasting ahead of coating. The net consumer market typically offers media blasting services coupled with their coating services at additional costs.

Commonly electrostatic gun or corona gun is utilized for using the powder coating to metal objects. Here, lets discuss the significant of electrostatic gun. Negative electric charge is imparted for the powder. The negatively charged powder will then be sprayed on the grounded object by mechanical or compressed air spraying equipment. Then it is accelerated for the workpiece from the powerful electrostatic charge. The article might be heated, and also the powder melts in to a uniform film, which is then cooled to make a hard coating. To realize more uniform finish preheating may help but problems can even be created as runs brought on by excess powder.

Tribo gun is the second form of gun which is used to spray powder on metal surfaces. The powder is first charged by triboelectric friction that charged powder particles then go through the grounded substrate. It requires an alternative formulation of powder with regards to corona guns.

Fluidized bed method doubles for Powder coating. In the beginning the substrate is heated and then it's dipped into aerated powder-filled bed. Later the powder sticks and melts on the hot object. Most dishwasher racks are coated with this technique of [http://fergusonaekz.bravesites.com/entries/general/uncovering-root-details-for-powder-coating-supplies powder coat guns].